The jewellery wires we offer are made of the highest quality silver 925 and 999. They differ in hardness and thickness, which is why they are a material willingly used for jewelry and accessories created with the wire wrapping or filigree technique. The filigree technique, known since antiquity, consists in weaving thin wires together and then tapping them, thanks to which ornaments with characteristic edges with an uneven, serrated line are obtained, which are then soldered or glued to other elements of the created object. On the other hand, the basis of the equally ancient wire wrapping technique is wrapping and entwining thicker wires with thinner ones, thanks to which intricate shapes and decorations are created. The thinnest wire models will also prove themselves in the florists' industry. The presented soft sterling silver wire for jewelry making can also be used to make pins for pendants, earwires and jump rings.
Information on Proper Use of Jewelry Components:
1. Avoiding Contact with Water
It is recommended to prevent components from coming into contact with water, including seawater or pool water. Such exposure may cause surface tarnishing and discoloration..
2. Avoiding Contact with Cosmetics and Detergents
Components should be protected from contact with cosmetics and household cleaning detergents. Certain substances in these products can trigger chemical reactions, leading to darkening or damage to the metal surface..
3. Storage
Components should be stored in a dry place, preferably in specialized pouches or boxes that protect against moisture and sunlight. Proper storage conditions help prevent corrosion and tarnishing..
4. Protection Against Mechanical Damage
Mechanical damage, such as scratches or deformation, should be avoided. During storage, it is advisable to separate components from other metal objects or tools..
5. Cleaning
Components should only be cleaned with soft, gentle cloths or specialized cleaners designed for silver and gold. Do not use abrasive brushes or materials that could scratch the surface..
6. Inspection Before Use
Before using components in jewelry production, it is recommended to inspect their condition, such as checking for minor damage, deformations, or loose elements..
7. Safety
Components are not intended as toys for children. Care should be taken to avoid situations where children might put them in their mouths or swallow them..